First, make sure you have your sensor correctly installed on your Respimat inhaler. Unsure if it’s installed correctly? Check out this article:
When using your Respimat inhaler as prescribed, the Propeller sensor will do all of the work to detect when you take a dose. In order for the Propeller sensor to work correctly, it must be correctly installed. Please note that you do not need to remove the clear portion of your Respimat inhaler when installing the Propeller sensor. All you have to do is slide the clear part of the sensor over the clear part of the Respimat inhaler. Once you have correctly seated the sensor, twist the Respimat inhaler to prime the medicine and press the Respimat button to release the dose. After you have released the dose, the sensor will detect and record it as being taken.
Inhaler technique tips from our team clinicians: Turn the base in the direction of the arrows until you hear a click (a half turn). Then open the cap and breathe out fully, away from the inhaler. Breathe in slowly and deeply while pushing the dose button on the inhaler. Hold your breath for 10 seconds (or as long as is comfortable) and then breathe out slowly, away from the inhaler.
Still feel like your doses aren’t registering correctly? Please contact our support team by calling +0011 1 (877) 251-5451 (US phone call) or sending an email to email@example.com.
Disclaimer: The information and education provided by Propeller Health coaches are not intended to be a substitute for professional medical advice, diagnosis or treatment that can be provided by physicians or any other health care professional. Propeller coaches are not providing health care, medical services or attempting to diagnose, treat or cure asthma or COPD. Rather, Propeller Health coaches serve as mentors and guides who will help members better self-manage their disease through education and awareness.